MHUB 2K (4x4)

MHUB 2K (4x4)

Product code: MHUB2K44
Available now
Please login for prices

Please check product options below for stock availability.

Quick Overview

Our best-selling 4x4 HDMI over Cat 5e / 6 matrix, mHub 2K (4x4) sends Full HD 1080p up to 50m / 164 ft and has four HDMI loop outs and two-way IR support. Sold as a complete package inc. IR, display receivers and power supplies.

Please login for prices

* Required Fields



Transmit Four Source Devices up to 50m in Full HD
mHub 2K (4x4) supports Full HD 1080p resolutions up to 50m / 164 ft, over a single Cat 6 cable from four source devices to four displays with two-way IR and ARC (on RX). Control is delivered through TCP/IP, RS232 or direct IR with a range of third party control drivers available to download free of charge. mHub 2K (4x4) supports all stereo and multichannel audio formats up to and including Dolby-Atmos and DTS:X.

Since being released in the summer of 2014, mHub 2K (4x4) has been praised for its speed of switching. Stephen Withers, Assistant Editor of AVForums, found that “the switching was seamless and there was no degradation of signal, with the system performing exactly as advertised.”

Mirrored Outputs
On the central hub of the mHub 2K (4x4) there are four HDMI loop out ports. These can be used for adding extra TVs or amps for surround sound home cinema set ups. If you’re adding extra TVs to your setup, please be aware that these TVs will be “mirrored”. This means that the TV linked up to HDMI loop out 1 will display the picture that is shown on TV connected to the port labelled Cat output 1, for example.

Full Control
Control is delivered through TCP/IP, RS232 or direct IR, meaning mHub can be easily integrated with third party control systems. The EDID management tools enable the highest resolution audio to be passed to an AVR via the mirrored HDMI outputs, whilst video is sent to the display location. mHub 2K (4x4) has discretely routed IR passback, discrete matrix control via IR and forwards IR routed to displays.

In the Box
All mHub 2K (4x4) matrixes are sold as complete install packages. In the box, dealers get access to everything they need for an 4x4 install: a 1U rack mountable central hub with rack ears and 12V PSU, four display receivers with 5V PSUs, IR kit, a small matrix remote, and four USB to 5V power leads.

Additional Information

Warranty 1 year
Form 1U
Product Type Matrix
Supported Video Inputs HDMI
Audio Input Types No
Maximum video inputs 4
Supported outputs HDMI, HDBaseT
Audio Output Types Coax
Maximum video outputs 4
Mirrored video outputs 4
Supported video resolution 1080i , 1080p (30Hz) , 1080p (60Hz)
Supported audio formats Dolby Digital Plus 7.1 Dolby TrueHD 5.1 Dolby TrueHD 7.1 DTS-HD Master 5.1 DTS-HD Master 7.1
Control Method IR, IP, RS232, Button
IR Control 2-way
Main Power 12V
Receiver Power 5V
Height (mm) 45
Width (mm) 440
Depth (mm) 200
Manuals View product manual


Drivers and Software support

Please access this products downloads via its support page