2-fold switched and metered PDU.
Expert Power Control 1121-1 for more operational security and energy efficiency in small installations.
- Demonstrably fewer and shorter outages of your critical IT and AV infrastructure.
- Very compact housing design allows space-saving integration even in confined AV environments such as media furniture.
- Detect AV and IT problems at an early stage: Proactive power and environment monitoring.
- Measurably increased energy efficiency (Green IT and AV): Electricity cost and CO2 savings through controlled switching off of devices.
- Integrate anywhere: Quickly and easily integrate anywhere with API interface: REST API, HTTPS, SNMP, Telnet and MQTT.
- Fix AV and IT problems quickly and effectively: Remote reboot or with the self-healing function (automatic restart) thanks to integrated watchdogs.
Key Features:
- Simple and quick mounting even in the smallest AV installation.
- Event and schedule controlled switching.
- Self-healing function.
- Precise current metering of up to 9 electrical units and residual current.
- Connector for plug-and-play sensors.
- Lightweight and robust plastic housing.
- Hybrid surge protection (SPD type 3).
Switching function:
- Each power port can be switched via HTTP(S), SNMP, ModbusTCP or command line interface via Telnet, SSH or MQTT.
- Programmable on/off sequences for remote reboots (Remote Reboot).
- Power ports can be switched when preset sensor thresholds are exceeded.
- Self-healing function thanks to 2-channel watchdog: Each power port can be assigned its own Watchdog (ICMP/TCP), which initiates a fully automatic restart if necessary.
- Switching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure.
- Current peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second.
Metering function:
- Power consumption metering (kwH) with 2 energy counters: one counter counts consistently, the other counter is resettable.
- Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr).
- Connector for combined plug-and-play sensors (temperature, humidity and air pressure) to prevent often occurring physical hazards like overheating and increased humidity or air pressure.
Security:
- Integrated type 3 overvoltage protection prevents damage to the device and connected loads.
- Long-life High-Inrush Relays prevent welding of relay contacts during inrush current peaks.
- Generation of status messages and alarms (e-mail, syslog, SNMP traps MQTT, SSH, Telnet).
- Encrypted e-mails (SSL, STARTTLS).
- Access protection by IP access control.
- Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH.
- Password protected access.
- Beeper for audible alarm when sensor limits are exceeded/deceeded.
Operation:
- Easy-to-read LEDs displaying switching status of outlets and device status.
- Firmware update via Ethernet during operation (no restart required).
- Simple and flexible configuration via web browser, Windows or Linux program.
- Dynamic assignment of an IP address via DHCP or manual assignment of static IP address.
- Rapid commissioning thanks to free and reliable drivers from GUDE's technology partners.