InStyle DMX Receiver 4 x 4 amp
This DMX receiver from InStyle LED’s is a 4-channel DMX 512 decoder that can be linked and used with any standard DMX 512 protocol receivers / controllers. This 4-channel DMX control module draws an input of either 12v or 24v, and will output up to 4 x 5 amps (that’s a maximum output of 5 amps per channel). The receiver is typically used to control RGB/RGBW products such as RGB LED tape, but can also be used with single-colour LED tape.
The DMX receiver offers RJ45 sockets for the data signal, and can be daisy-chained using Cat 5 cable wired back to a controller. InStyle LED can provide a wiring diagram for a 3-pin XLR-to-RJ45 cable, if your controller or other products use 3-pin XLR. You can link together as many DMX receivers as you need, but bear in mind a signal-booster will be needed to boost the controller signal after 50 DMX receivers.
Each DMX receiver can be controlled individually or grouped together. This means the LED lights wired to one DMX receiver can do something different to the other DMX receivers around it. This can be extremely effective for DMX control of large projects such as bars, clubs, restaurants and theatres, where a programmer can pre-set lighting programmes through a linked PC desk.
The wall controller comes complete with pre-programmed settings and is very simple to use.
Features:
- Input Voltage: DC, +12~24V.
- Power Output: 240W (12V), 480W (24V).
- Length: 168mm.
- Width: 51mm.
- Depth: 22mm.
- DECODE CHt: 1-4.
- Signal Input: Standard DMX 512 Protocol.
- Output Per Channel: 60 watts (12V), 120 watts (24V).
- CE + RoHS Certificated: Yes.
- Output Signal: 0~24V Pulse Width Modulation.
| Type | LED Receiver |
|---|---|
| Manufacturer | InStyle LED |
| Product Range | DMX Receiver |
| Warranty | 5 years |
| MSRP | £57.14 |