A compact, high-density amplifier delivering flexibility and performance in a half-width 1U design.
Big power in a small footprint.
IA125-4 provides four channels at 125 W or two bridged channels at 250 W, making it ideal for smaller installations or zone amplification where space is at a premium.
Key features:
- 4 x 125 W or 2 x 250 W (bridged)
- DSP configuration
- 1U half-width design
Specification
- Channels: 4
- Output Power @ 4 Ohms/8 Ohms: 4 x 125W SE
- Output Power @ 70/100V: 2 x 250 BTL
- Poweshare (up to): 2 x 250 W
- Power Consumption: 150 W
- Thermal Output: 512 BTU
- Polarity (Default): Non-inverting
- Dimensions: 44 x 220 x 325 mm (13/4 x 811/16 x 115/8")
- Output Voltage: 70Vp / 140Vpp (SE unloaded), 140Vp / 280 Vpp (BTL unloaded)
- Signal to Noise Ratio: >106dB (A-weighted, 20 Hz – 20 kHz, 8 Ohm load)
- THD+N (typical): <0.05% (20 Hz – 20 kHz, 8 Ohm load, 3db below rated power)
- Frequency Response: +0/-0.25dB 20Hz - 20kHz (8 Ohm load, 3dB below rated power)
- Protection Circuits: Short circuit -, DC, Undervoltage -, Temperature – and Overload protection
- Power Supply: Switch mode power supply with Power Factor Correction (PFC) and standby converter
- Operating Voltage/Frequency: Universal Mains, 100 V – 240 V, 50 Hz – 60 Hz
- Standby Consumption: <0.5 W
- Accessories: Rack Mount Kit, Wall/desktop mount kit (sold seperatley)
- Power Ratings: 1% THD @ 120Vac and 230Vac
- Cabinet Finish: Black Anodised
- Warranty: 5 years
* SE - Single Ended
** BTL - Bridge Tied Load
*** BTU - British Thermal Unit
| Shipping Weight (kg) | 7.600000 |
|---|---|
| Colour | Black |
| Manufacturer | Monitor Audio |
| Type | Multi-zone Amplifier |
| Product Range | Streamers & Amplifiers |
| Environment | Indoor |
| Frequency Response | +0/-0.25dB 20Hz - 20kHz (8 Ohm load, 3dB below rated power) |
| MSRP | £1,375.00 |