GUDE Expert Power Control 1141-1 4-fold switched and metered PDU.
For more operational security and energy efficiency in small installations.
Demonstrably fewer and shorter outages of your critical IT and AV infrastructure.
Compact housing design allows space-saving integration even in confined AV environments such as media furniture.
Detect AV and IT problems at an early stage: Proactive power and environment monitoring.
Measurably increased energy efficiency (Green IT and AV): Electricity cost and CO2 savings through controlled switching off of devices.
Integrate anywhere: Quickly and easily integrate anywhere with API interface: REST API, HTTPS, SNMP, Telnet and MQTT.
Fix AV and IT problems quickly and effectively: Remote reboot or with the self-healing function (automatic restart) thanks to integrated watchdogs.
Key Features:
Simple and quick mounting even in the smallest AV installation.
Event and schedule controlled switching.
Precise current metering of up to 9 electrical units and residual current.
Connector for plug-and-play sensors.
Self-healing function.
Hybrid surge protection (SPD type 3).
Switching function:
Each power port can be switched via HTTP(S), SNMP, ModbusTCP or command line interface via Telnet, SSH or MQTT.
Programmable on/off sequences for remote reboots (Remote Reboot).
Power ports can be switched when preset sensor thresholds are exceeded.
Self-healing function thanks to 4-channel watchdog: Each power port can be assigned its own Watchdog (ICMP/TCP), which initiates a fully automatic restart if necessary.
Switching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure.
Current peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second.
Metering function:
Power consumption metering (kwH) with 2 energy counters: one counter counts consistently, the other counter is resettable.
Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr).
Connector for combined plug-and-play sensors (temperature, humidity and air pressure) to prevent often occurring physical hazards like overheating and increased humidity or air pressure.
Security:
Integrated type 3 overvoltage protection prevents damage to the device and connected loads.
Long-life High-Inrush Relays prevent welding of relay contacts during inrush current peaks.
Generation of status messages and alarms (e-mail, syslog, SNMP traps MQTT, SSH, Telnet).
Encrypted e-mails (SSL, STARTTLS).
Access protection by IP access control.
Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH.
Password protected access.
Beeper for audible alarm when sensor limits are exceeded/deceeded.
Operation:
Easy-to-read LEDs displaying switching status of outlets and device status.
Firmware update via Ethernet during operation (no restart required).
Simple and flexible configuration via web browser, Windows or Linux program.
Dynamic assignment of an IP address via DHCP or manual assignment of static IP address.
Rapid commissioning thanks to free and reliable drivers from GUDE's technology partners.
